Kontrolės ir matavimo įranga
Vamzdyno armatūra ir išpildymo mechanizmai
Vamzdynų aptarnavimo ir remonto įranga
Antikorozinės medžiagos ir hermetikai
Apie mus
Jau dvidešimt metų mūsų įmonė sėkmingai plečiasi rinkoje, tiekdama kokybiškas prekes ir paslaugas.
Pradžia
UAB “ELEKOMS” įkurta 1996 metais ir užsiima šiuolaikinės pramoninės įrangos ir pažangių technologijų teikimu Baltijos šalių įmonėms.
UAB “ELEKOMS” bendradarbiauja su pasaulyje žinomais pramoninės įrangos, skirtos techninio proceso matavimams, kontrolei, registravimui bei valdymui, dujuotiekio aptarnavimui ir remontui, gamintojais.
Mūsų įmonė siūlo pilną paslaugų spektrą, pradedant nuo įrangos parinkimo konkrečiam naudojimui Jūsų bendrovėje (atsižvelgiant į kainos ir kokybės santykį), pilną techninę konsultaciją, įrangos pristatymą, montavimo darbus ir derinimą, taip pat garantinį bei pogarantinį aptarnavimą ir remontą. Taip pat siūlome projektavimo darbus.
Šiandien
Esame pasirengę padaryti viską, kad patenkinti esamų ir potencialių Užsakovų pageidavimus. Jūs galite kreiptis bet kokios informacijos ar techninės konsultacijos, o taip pat pateikti paklausimą tiek įrangai, tiek ir detaliai techninei informacijai gauti. Mūsų įmonės darbuotojai mielai padės Jums visais rūpimais klausimais.
Siūlome
platų produkcijos asortimentą:
Kontrolės ir matavimo įranga;
Vamzdyno armatūra ir išpildymo mechanizmai;
Vamzdynų aptarnavimo ir remonto įranga;
Antikorozinės medžiagos ir hermetikai;
Vārstu plombēšanas ierīces.
Siūlome platų produkcijos asortimentą:
• Kontrolės ir matavimo įranga
• Vamzdyno armatūra ir išpildymo mechanizmai
• Vamzdynų aptarnavimo ir remonto įranga
• Antikorozinės medžiagos ir hermetikai
• Uždaromosios armatūros plombavimas
TDW High Pressure
T101 Drilling Machine
Models T-101B and T-101B-XL
Pipeline Services Pigging Products
RES-Q® Composite Wrap
Products and Services for Pipelines,
Sizes: 2- through 60-inch
Installation services and customer training available
Griezes piedziņas ar servopiedziņas vadību
SA 07.2 – SA 16.2/SAR 07.2 – SAR 16.2 AUMA MATIC AM 01.1/AM 02.1
Part-turn actuators SQ 05.2 - SQ 14.2
The new generation of electric part-turn actuators SQ 05.2 - SQ 14.2 and actuator controls AC 01.2
Electric Actuators
For hydraulic steel structures & hydropower
Electric Actuators
For industrial valve automation
C A T E X 3
Explosimeter-catharometer Detection & Localization of Gas leaks
µ G A Z E X ™
Multi-function Pocket Explosimetr Personal protection in explosive zones
µ G A Z T O X ™
Oxygen and Toxic Gas Detector Personal protection for hazardous environments
GAZOSCAN™
Gas Leak Detection and Natural Gas Network Survey.
Handheld Remote Methane Leak detector with Laser Spectroscopy Technology
STOPAQ AQUASTOP - Blīvēšanas savienojums
• Sienas ieejas zem ūdens līmeņa
• Tekošas ūdens sūces blīvēšana
• Sienu izvadkanāli ēkās
• Vairākas caurules un kabeļievadi
• Spirālveida aptinums
• Taisns aptinum
System Selection Guide
Oil & Gas Corrosion Prevention
Innovative Infrared Technology
For Non-Contact Temperature Measurement
Float Level Switches for Liquids
• For level control of pumps
• For narrow access tanks / for drinking water
• For high level control
Juridinis adresas:
Mežaparka pr.10 k1-3, Jūrmala, LV-2015, Latvija
Įmonės kodas: 40003279528
PVM mokėtojo kodas: LV 40003279528
AB “Luminor Bank”, banko kodas: RIKOLV2X
Banko sąskaitos: LV89RIKO0002013224191 (EUR)
Banko sąskaitos: LV83RIKO0002930115441 (EUR)
Vadovas: Aleksandra Šehovceva
+371 29156108 aleksandra@elekoms.lv
Inžinierius įranga: Nikolajs Čujakovs
+371 29150991 nikolajs@elekoms.lv
Dėl išsamesnės informacijos, prašome skambinti tel. +371 67336444
arba naudotis mūsų kontaktų forma nurodyta apačioje ir mes pasistenksime atsakyti jums kuo skubiau!
Armatury Group užtikrina pramoninės armatūros sukūrimą, gaminimą, pardavimą bei aptarnavimą, vamzdžių ir kitų vamzdynų detalių, pagalbinės įrangos gamybą ir pristatymą klasikinės bei branduolinės energetikos sferoje, chemijos ir naftos chemijos, metalurgijos, dujų pramonėse, gavybinės pramonės ir vandens tiekimo sferose.
AUMA yra pagrindinis pavarų mechanizmų: elektropavarų ir reduktorių pasaulinis gamintojas jau daugiau nei 45 metus. AUMA siūlo platų technologinių sprendimų spektrą įvairių užduočių energetikos, vandens tiekimo, dujų ir naftos bei kitose pramonės sferose vykdymui.
ĮRENGINIAI
Griezes piedziņas ar servopiedziņas vadību
SA 07.2 – SA 16.2/SAR 07.2 – SAR 16.2 AUMA MATIC AM 01.1/AM 02.1 Vaizdas
Part-turn actuators SQ 05.2 - SQ 14.2
The new generation of electric part-turn actuators SQ 05.2 - SQ 14.2 and actuator controls AC 01.2 Vaizdas
Electric Actuators
For hydraulic steel structures & hydropower Vaizdas
Electric Actuators
For industrial valve automation/em> Vaizdas
Endress+Hauser yra pagrindinis kontrolės ir matavimo įrangos, techninių procesų automatizavimo sprendimų sukūrėjas, gamintojas ir tiekejas. Endress+Hauser - tai aukščiausia kompetencija visose pramonės srityse, tokiose kaip chemija, elektroenergija, nafta ir dujos, maisto pramonė.
Gazomat – prancūzų kompanija, gaminanti kišeninius asmeninės apsaugos sprogiųjų dujų vietose detektorius, portatyvią įrangą dujų nutekėjimų ir lokalizacijos aptikimui, įrangą dujotiekių analizei, naudojant įrengtą transporto priemonę.
ĮRENGINIAI
C A T E X 3
Explosimeter-catharometer Detection & Localization of Gas leaks Vaizdas
µ G A Z E X ™
Multi-function Pocket Explosimetr.
Personal protection in explosive zones Vaizdas
µ G A Z T O X ™
Oxygen and Toxic Gas Detector.
Personal protection for hazardous environments Vaizdas
GAZOSCAN ™
Oxygen and Toxic Gas Detector.
Personal protection for hazardous environments Vaizdas
Pepperl+Fuchs didžiausias elektroninių daviklių ir apsaugos nuo sprogimo nekibirkščiuojančių elektros grandinių pramonėje sistemų gamintojas.
Automatizavimo skyrius – lyderis pramoninių daviklių gamyboje.
Procesų automatizavimo skyrius – nekibirkščiuojančių ir nesprogių komponentų, apsaugos nuo sprogimo pavojingose zonose taikymo ir įrangos gamintojas.
Stopaq gamina platų ekologiškai švarios produkcijos, skirtos konstrukcijų apsaugai nuo korozijos ir vandens įsiskverbimo, asortimentą.
Antikorozinės dangos ir hermetikai naudojami daugelio užduočių sprendimui, pradedant nuo požeminių ir povandeninių vamzdynų korozijos iki įvairių inžinierinių komunikacijų izoliacijos.
ĮRENGINIAI
STOPAQ AQUASTOP - Blīvēšanas savienojums
• Sienas ieejas zem ūdens līmeņa;
• Tekošas ūdens sūces blīvēšana;
• Sienu izvadkanāli ēkās;
• Vairākas caurules un kabeļievadi Vaizdas
TDW labiausiai žinomas vardas vamzdynų įrangos ir paslaugų pasaulyje.
Užtikrina saugių vamzdynų vientisumui sausumoje ir jūroje sprendimų kompleksą. TDW užtikrina vamzdynų remontą nenutraukiant jo darbo proceso, teikia vamzdynų sistemų valymą, geometriją ir MFL inspekciją bet kokiai po slėgiu veikiančiai vamzdynų sistemai.
Integrity Inspection Solutions Differential Diagnostics for the Life of Your Pipeline
Optris GmbH yra viena iš inovatyvių kompanijų nuo 2003 metų gaminanti platų spektrą bekontaktinio temperatūros matavimo prietaisų veikiančių infraraudonųjų spindulių spinduliavimo principu.
Kompanija gamina portatyvius termometrus, stacionarius pramoninius termometrus, o taip pat ir infraraudonąsias kameras.
ĮRENGINIAI
Innovative Infrared Technology
For Non-Contact Temperature Measurement Vaizdas
ATMI – tai novatoriška ir aktyvi prancūzų kapitalo įmonė, kuri per daugiau kaip 35 metus įrodė esanti skystų ir birių medžiagų plūduriavimo ir palinkimo lygio jungčių patyrusi gamintoja.
Iš tiesų ATMI yra vienintelė bendrovė pasaulyje, turinti didžiausią medžiagų plūduriuojančių siurblių jungčių ir palinkimo lygio jungčių pasiūlą.
Gamybinėje programoje rasite net 20 skirtingų lygio reguliatorių, kurių yra net 50 variantų.
ĮRENGINIAI
Float Level Switches for Liquids
• For level control of multiple pumps;
• For level control of individual pumps;
• For narrow access tanks / For drinking water;
• For high level control Vaizdas
“ARMATURENBAU GmbH” iš Wesel-Ginderich ir MANOTHERM Beierfeld GmbH iš Grünhain-Beierfeld drauge įsteigė tradicinę ir novatorišką įmonę, kurios kompetenciją sudaro slėgio matavimo ir temperatūros matavimo prietaisų gamyba ir perdirbimas.
Įmonė savo paslaugas siūlo specifinėse sferose, tokiose kaip šaldymo matavimo įranga, geležinkelio bėginių transporto priemonių slėgio matavimo įranga, itin grynų dujų ar saugos matavimo įranga.
• Mechanical pressure measuring instruments;
• Chemical seals;
• Termometri;
• Temperature measuring instruments;
• Limit switch contact assemblies;
• Pressure transmitters and digital displays;
• Pressure gauge test equipment;
• Accessory and special connections.
SO.CA.P. pneumatic tubular form supplier was founded in 1956 with the aim of manufacturing and selling Pneumatic Tubular Forms, Foldable and Collapsible Tanks, Pneumatic Pipe Stoppers, Gas Storage Bags and Foldable Tanks.
ĮRENGINIAI
Pneumatic gas stoppers (gas bags) Pneumatic Stopper Type G/L Vaizdas
2012-...
Dujų linijų ДУ 400–ДУ 1000, 35–55 barai, blokavimas,
nestabdant dujų tiekimo pagal STOPPLE® T.D. Williamson technologiją.
Užsakova: AB Amber Grid (Lietuva)
Industry: Energy Founded: 2013 Headquarters: Vilnius, Lithuania Products: Natural gas transmission Website:www.ambergrid.lt
2014-2015
Terminės alyvos ДУ 350 vamzdynų prijungimas, 3 barai, 350 °С,
nestabdant srauto pagal STOPPLE® T.D. Williamson technologiją..
Užsakova: UAB Neo Group (Lietuva)
Industry: Сhemical industry Founded: 2003 Headquarters: Rimkai, Lithuania Products: PET pellets Website:neogroup.eu
2002-...
Magistralinių dujų linijų ir atsišakojimų čiaupo mazgų modernizacija.
Uždaromosios armatūros, pavarų ir reduktorių AUMA, Ledeen pristatymas.
Įrengimas, montavimas, derinimas.
Užsakova:
АS Latvijas Gāze (Latvija)
AS Elering Gaas (Estija)
Industry: Energy Founded: 1991 Headquarters: Riga, Latvia Products: Natural gas storage, sale and distribution, energy trading Website:www.lg.lv
Industry: Electricity Founded: 1998 Headquarters: Tallinn, Estonia Products: Electric power transmission, Natural gas transmission Website:www.elering.ee
2014-2015
Pavarų ir reduktorių AUMA pristatymas, montavimas, derinimas.
Užsakova: Nord šiluminės elektrinės VKG Energia OU (Kohtla-Jarve, Estija)
Industry: Oil shale industry Power generation Headquarters: Kohtla-Järve, Estonia Website:www.vkg.ee
2012-2014
Pavarų ir reduktorių AUMA pristatymas, montavimas, derinimas.
Užsakova:
AS Alexela Terminal (Estija)
Neste Oil (Estija)
Industry: Oil and gas industry Founded: 1948 Headquarters: Espoo, Finland Products: Refined oil products
Renewable fuels Website:www.neste.com
2013-2016
Tarpvalstybinės dujų matavimo stoties „Kornetai“ (Latvija–Rusija) rekonstrukcija.
Pavarų ir reduktorių AUMA, hidropneumatinių pavarų Ledeen pristatymas, įrengimas, montavimas.
Priderinimas prie jau esančios uždaromosios armatūros.
Užsakova: АS Latvijas Gāze (Latvija)
Industry: Energy Founded: 1991 Headquarters: Riga, Latvia Products: Natural gas storage, sale and distribution, energy trading Website:www.lg.lv
Integrity Inspection Solutions Differential Diagnostics for the Life of Your Pipeline
T-101 Drilling Machine
Models T-101B and T-101B-XL
The cap locks the feed and rotation of machine to set and retrieve completion plugs.
• T-1O1B Drilling Machine
• T-101B-XL Drilling Machine
• Includes: Crank Handle, Cap, Bleeder Valve, Nipple, Packing Wrench
• Optional Equipment:
- Air Motor (Pistol Grip)
- Air Motor (Right Angle)
- Drive Socket
- Steel Carrying Case (Std.)
- Steel Carrying Case (XL)
- Plug Holder for 2" THREAD-O-RING™ Plug
- Plug Holder for 2" and 3" SHORTSTOPP® Completion Plug
Operating Specifications
• Maximum Operating Pressure
• Maximum Operating Temperature * For intermittent service only. Maximum continuous rating is 350°F (177°C) at 1,025 psi (70 bar)
Drilling Machine Specifications
• Boring Bar Travel
• Overall Length
• Boring Bar Extension/Revolution
• Feed Mechanism
Accessories for PIG-SIG® IV and V Installation
• Drill for wall thickness more than 3/8" (9.5 mm)
• Valve Adapter for Cutter or Drill - for use on 2" (50 mm) threaded valve
• 2" (50 mm) THREAD-O-RING™ Plug Holder for use with PIG-SIG® IV
• PIG-SIG® V Plug Holder 2" (50 mm) ASME CIass 600 conventional valve with 2-1/16" (53 mm) through-bore is recommended for use in making taps for PIG-SIG® Scraper Passage Indicator installation
Integrity Inspection Solutions Differential Diagnostics for the Life of Your Pipeline
Pipeline Services Pigging Products
As the industry’s most trusted provider of integrated piping maintenance, modi cation and repair capabilities for a full range of pressurized piping system applications, TDW delivers customized pipeline service and pigging solutions speci cally designed to optimize performance, reduce costs and make downtime a thing of the past.
Pipeline Integrity Services:
• On- and off-line cleaning
• Commissioning/Decommissioning
• Consulting Services
• Engineering Services
• Turnkey Project Management
• High-resolution Magnetic Flux Leakage (MFL) Technology
• Multiple Dataset technology, including SpirALL™ MFL
• Active Speed Control Technology
• XYZ Mapping
• Deformation Technology
• Non-Destructive Examination & Repair
• Pull-Through Inspection Service
• Hydrostatic Testing and Drying
Pigs and Pigging Products:
• Batching & Displacement Pigs
• Foam Pigs
• Pipeline Cleaning Pigs
• Specialty Pipeline Pigs, including PitBoss™ Pig, V-Jet® Pig, X-Pig® Tool
• D-2000 Closures
• PIG-SIG® Pig Passage Indicator, intrusive and non-intrusive
• TracMaster™ Pig Tracking System
• SmartTrap® Pig Launchers and Receivers, including the SmartTrap® Automated Combo Launcher and Receiver
Integrity Inspection Solutions Differential Diagnostics for the Life of Your Pipeline
RES-Q® Composite Wrap
Products and Services for Pipelines
Sizes: 2- through 60-inch
Installation services and customer training available
DESCRIPTION
• Permanent Rehabilitation
RES-Q® Composite Wrap offers a permanent rehabilitation solution for liquid and gas pipelines with external corrosion, gouges, grooves, arc burns and dents. A high-strength carbon fiber and epoxy system, RES-Q Composite Wrap utilizes a stitched, bidirectional carbon fabric to provide superior structural reinforcement in the hoop and axial directions. Capable of restoring a pipeline to its design pressure without shutting down operation, RES-Q Composite Wrap is a flexible in-service alternative to repair clamps, welded sleeves and pipe replacement.
• Product Innovation
The result of T.D. Williamson, Inc.’s extensive pipeline rehabilitation experience, RES-Q Composite Wrap addresses the needs of both the pipeline operator and composite wrap installer. Featuring stronger materials and improved performance based on years of customer feedback, RES-Q Composite Wrap truly represents the next generation of carbon composite wrap.
• Certified Performance
Extensive testing validates the significant benefits of using RES-Q Composite Wrap where high pressure and longer service are anticipated. Thoroughly tested by accredited third-party laboratories, RES-Q Composite Wrap meets the requirements of international composite standards ASME PCC-2 and ISO 24817, liquid and gas pipeline standards ASME B31.4/B31.8, as well as U.S. Department of Transportation standards.
• Solution Assessment
The RES-Q Composite Wrap solution assessment compiles information such as pipe diameter, material grade, wall thickness, design pressure, design temperature, size of anomalies, and minimum and maximum operating pressure and temperature. RES-Q ProCalc™ software analyzes this data to determine the number of wraps and repair length required for straight pipeline. As part of the solution assessment, TDW offers a host of rehabilitation options for customers to select.
FEATURES
• Improved Formulations
While maintaining no volatile solvents in a 100% reactive system, improved RES-Q Composite Wrap formulations provide a two-year shelf life. The resin formulation enhances the long-term strength of the epoxy matrix.
• Simplicity and Consistency
All RES-Q Composite Wrap resins and hardeners are packaged in metal containers for reliability during transportation. All materials specified for a RES-Q Composite Wrap solution are pre-measured, pre-cut and packaged for field installation. RES-Q Composite Wrap utilizes only one epoxy product to both wet the carbon fabric and to bond the wrap to the pipeline. Improved installation techniques ensure a thoroughly wetted carbon fabric and more consistent composite application. The RES-Q Composite wrap is recommended to be applied on substrate surface temperatures between 40 and 120º F with a maximum design temperature of 165º F.
• Enhanced Physical Properties
Thanks to material advances, RES-Q Composite Wrap results in fewer plies and reduced thickness because of greater strength, higher modulus of elasticity and lower creep. The fiberglass arrier in each restoration kit provides a positive layer of insulation between the pipeline and carbon fabric. This stitched carbon fabric provides efficient load transfer from the pipeline to individual fibers while also improving long-term strength.
• Versatility
RES-Q Composite Wrap is a versatile solution to pipeline defects where clearance between pipelines is limited or width of excavation is narrow due to job site restrictions. RES-Q Composite Wrap can be installed horizontally and vertically, and it can conform to straight pipeline, elbows, and even complex systems such as reducers or tees.
OPTIONS
• Customization
Each customized RES-Q Composite Wrap solution is based on pipeline configuration and current efect conditions. System design and fabric width options facilitate installation and provide uniform applications for pipeline components like welds and bends. Standard, elbow and tee wraps are available to meet virtually any need.
• Training
Expert training for field technicians and contractors is offered at our state-of-the-art facility in Tulsa, Okla., U.S.A., or at customer locations. Composite wrap training can be incorporated with other covered tasks offered by the TDW LineMaster™ training program.
• Installation
Drawing upon the accumulated knowledge and experience of more than 200 certified technicians around the globe, TDW is proud to offer RES-Q Composite Wrap installation.
• Putty
Putty is used to fill large voids created by severe corrosion, gouges, grooves or dents. Also used to taper uneven welds and misaligned pipes.
• Identification Banding Kit
Kit includes two ID bands, one for each side of the repair.
Composite Wrap 3-Stage Installation Overview
1. Prepare Pipeline
2. Barrier Fabric Preparation
3. Restore Pipeline
* The above does not reflect full installation procedures. For full installation instructions, refer to instructions provided with RES-Q® Composite Wrap Kit.
Integrity Inspection Solutions Differential Diagnostics for the Life of Your Pipeline
Griezes piedziņas ar servopiedziņas vadību
SA 07.2 – SA 16.2/SAR 07.2 – SAR 16.2 AUMA MATIC AM 01.1/AM 02.1
Tipa datu plāksnīte:
Visiem iekārtas komponentiem (piedziņai, vadības blokam, motoram) ir tipa datu plāksnītes.
Tips un tipizmērs:
Šī instrukcija ir paredzēta šādām ierīcēm:
• griezes piedziņa vadības ekspluatācijai – SA 07.2, 07.6, 10.2, 14.2, 14.6, 16.2;
• griezes piedziņa parastai ekspluatācijai – SAR 07.2, 07.6, 10.2, 14.2, 14.6, 16.2;
• AM 01.1/02.1 = servopiedziņas vadība „AUMA MATIC”.
Pieprasījuma numurs:
Katrai iekārtai ir piešķirts pieprasījuma numurs.
Izmantojot šo numuru, tīmekļa vietnē www.auma.com var lejupielādēt savienojumu shēmas, pārbaudes ziņojumus un citu informāciju par iekārtu.
Vadība:
• 24 V līdzstrāva = vadība, izmantojot paralēlo saskarni ar 24 V līdzstrāvas vadības spriegumu.
• 115 V maiņstrāva = vadība, izmantojot paralēlo saskarni ar 115 V maiņstrāvas vadības spriegumu.
• 0/4–20 mA = vadība, izmantojot paralēlo saskarni ar analogo ieeju 0/4–20 mA.
Īss apraksts:
Griešanas piedziņa:
Definīcija atbilstoši EN ISO 5210: Griešanas piedziņa ir servopiedziņa, kas vismaz ar vienu pilnu apgriezienu pārnes griezes momentu uz armatūru. Tā var uzņemt vilces spēku.
AUMA griešanas piedziņa tiek nodrošināta ar elektromotoru un var uzņemt vilces spēku savienojumā ar savienojuma formu A. Darbināšanai manuālā režīmā ir paredzēts rokas rats.
Izslēgšana gala stāvokļos var notikt atkarībā no gaitas vai griezes momenta.
Vadīšanai vai piedziņas signālu apstrādei obligāti nepieciešams vadības bloks.
Servopiedziņas vadība:
Servopiedziņas vadības bloks AUMA MATIC kalpo AUMA servopiedziņu vadīšanai un tiek piegādāts gatavs ekspluatācijai.
Vadības bloku var uzstādīt tieši pie servopiedziņas vai atsevišķi, uz sienas kronšteina.
AUMA MATIC vadības bloka funkcijas ietver gan vienkāršu armatūras vadīšanu VAĻĀ - CIET režīmā, gan pozīcijas un dažādu paziņojumu indikāciju, kā arī pozīcijas regulēšanu.
Lokālās vadības pults:
Vadības apkalpošana (ar pogām), iestatīšana un indikācija ir iespējama lokāli (šīs instrukcijas saturs).
Part-turn actuators SQ 05.2 - SQ 14.2
The new generation of electric part-turn actuators SQ 05.2 - SQ 14.2
and actuator controls AC 01.2
• Torques: 50 – 2,400 Nm;
• Operating time ranges for 90°: 4 – 100 s;
• High IP enclosure protection;
• Explosion proof version available;
• Excellent corrosion protection;
• Parallel interfaces to DCS;
- up to 10 binary inputs;
- up to 12 output contacts;
- up to 2 analogue inputs and outputs;
• Parallel interfaces to DCS;
- Profibus DP-V2, Modbus RTU and others
• Electrical connection via AUMA plug/ socket connector with enlarged terminal compartment/cable entries.
• Optimised modulating behaviour;
• Extended operating time range;
• Simplified commissioning and service;
• Long service life and outstanding reliability;
• Identical operation concept to multi-turn actuators of generation 2.;
• Flexible mechanical adaptation to suit different valve types.
Electric Actuators
For hydraulic steel structures & hydropower
This brochure intends to describe functions and possible applications for electric actuators, actuator controls and gearboxes in civil engineering constructions for water applications and in hydropower.
The document provides an introduction into the topic, an overview on products and established explanations regarding design and function of electric AUMA actuators.
On the rear pages of this brochure, you will fi nd a a chapter with detailed technical data for swift product selection. For device selection, further information can be obtained from specific data sheets. It will be our pleasure to assist you and provide any further details that might be needed.
The latest information on AUMA products can be found on the Internet at www.auma.com.
All documents, including dimensional drawings, wiring diagrams, technical and electrical data sheets, as well as inspection certifi cates are available on the Internet in digital form.
Electrical actuators for hydraulic steel structures and hydro power
• Benefits of electric actuators
• Applications for hydraulic steel structures and hydropower
• Weirs, dams and locks
• Fish ladders
• Trash racks
• Turbine control
• Small hydroelectric power installations
Modular range
• SA multi-turn actuators and SQ part-turn actuators
• Automation solutions for all requirements
• Service conditions
• Underwater use
• Basic actuator functions
• Variable-speed actuators
• Adapting to the installation on site
Safety
• Protection for the valve, protection for the actuator
• Protection against unauthorised use
• Functional safety (SIL)
Communication
• Integration into the DCS - control concepts
• Communication - tailor-made interfaces
• Communication - fi eldbus
Operation and clarity
• AM and AC actuator controls
• Clearly structured operation
• Reliability, service life, maintenance - with test engineering features
• AUMA CDT for AC controls - easy commissioning
• AUMA CDT for AC controls - diagnostic dialogue
Design
• Uniform design for SA and SQ
• Electromechanical control unit
• Electronic control unit
Technical data
• SA multi-turn actuators
• SA/GK multi-turn actuators
• SA/GHT multi-turn actuators
• SA/GST multi-turn actuators
• SA/GS part-turn actuators
• SA multi-turn actuators – details
• AM and AC actuator controls
Electric Actuators
For industrial valve automation
This brochure intends to describe functions and possible applications for electric actuators, actuator controls and gearboxes.
The document offers an introduction into the topic, an overview on products and founded explanations regarding design and function of electric AUMA actuators.
On the rear pages of this brochure, you will find a chapter with detailed technical data for swift product selection. For device selection, further information can be obtained from our separate specific data sheets. It will be our pleasure to assist you and provide any further details that might be needed.
The latest information on AUMA products can be found on the Internet at www.auma.com.
All documents, including dimensional drawings, wiring diagrams, technical and electrical data sheets, as well as inspection certificates are available on the Internet in digital form.
Basics
• Applications
• What is an electric actuator?
• SA multi-turn actuators and SQ part-turn actuators
• Automation solutions for any valve type
• Service conditions
• Basic actuator functions
• Controls concepts
Operation and clarity
• Integration within the DCS - AM and AC actuator controls
• Clearly structured operation
• Reliability, service life, maintenance - with test engineering features
• AUMA CDT for AC controls - easy commissioning
• AUMA CDT for AC controls - diagnostics dialogue
Communication
• Communication - tailor-made interfaces
• Communication - fi eldbus
• Communication - HART
• SIMA - the fi eldbus system solution
• Alternative communication channels - Wireless and fi bre optic cables
Design
• Uniform design for SA and SQ
• Electromechanical control unit
• Electronic control unit
Solutions for all combinations
• Multi-turn actuator - part-turn gearbox combinations - for large torques
• Special circumstances - adapting to any mounting position
Safety
• Protection for valve, protection during operation
• Functional safety - SIL
Technical data
• SA multi-turn actuators and SQ part-turn actuators
• AM and AC actuator controls
• SA/GS part-turn actuators
• SA/GK multi-turn actuators
• SA/GST multi-turn actuators
• SA/GHT multi-turn actuators
• SQ part-turn actuators with base and lever anD SA/GF
• SA/LE linear actuators
C A T E X 3
Explosimeter-catharometer Detection & Localization of Gas leaks
Benefiting from the latest technological evolutions with current European explosion-proof and metrological certifi cation standards, the CATEX TM 3 detector, the latest generation of explosimeter-catharometer from GAZOMAT TM, makes it possible to pinpoint the exact location of a leak while ensuring optimal safety for operation in hazardous atmospheres.
Precise and reliable measurements:
3 measurement scales
• PPM scale: 0 ppm to 10.000 ppm;
• LEL scale (explosimetry): 0% to 100% LEL;
• Gas scale (catharometry): 0% to 100% gas volume.
Two scales displayed on a large LCD screen:
• Constant display of the gas volume scale (*);
• Automatic switching between PPM and LEL scales:
- PPM mode, up to 10,000 ppm;
- LEL mode, from 10,000 ppm to 4.4% gas volume (*).
Start-up of the unit away from the explosive atmosphere either in PPM/Gas mode or in LEL/Gas mode, depending on the nature of the area investigated and the explosion hazard level.
Automatic zero-setting of the three scales at start-up away from any explosive atmosphere and outdoors.
Manual zero setting possible while the unit is in operation.
Easy-to-use
• Simple and intuitive interface;
• Self-test at start-up of all key functions;
• Visual and audio alarms for selection;
• Status indicators for key components;
• Dialog window for messages;
• 12 hour operating time;
• Complete set of accessories.
Compact and Robust Design
• High performance material provide ultimate protection for both the apparatus and the operator
• A high protection degree (IP 55) for superior resistance to extreme environmental conditions
• A reduced size and weight for the operator’s greater comfort.
Extended applications:
• Leak confi rmation and localization in bored holes;
• Leak detection either indoors or outdoors;
• Risers inside buildings;
• Gas boxes;
• Safety checks before re-pressurizing or after de-pressurizing gas pipelines (measurement of gas concentration level in gas pipelines with or without the presence of Nitrogen);
• Control of the atmosphere: monitoring of the Lower Explosive Limit to secure a working area.
ATEX certifi cation - the guarantee of a high level of security
In compliance with the European directive ATEX 94/9/CE dated 23 March 1994, the CATEX TM 3 can be used in category 2 explosive zones in confi ned spaces.
µ G A Z E X ™
Multi-function Pocket Explosimetr
Personal protection in explosive zones
The µGazexTM device provides users with personal protection against explosion hazards in hazardous environments.
This pocket explosimeter is certifi ed to ATEX Group 1 (Mines) and Group 2 standards and is available in four versions:
1) Explosimeter - 1 measurement scale: 0-100% LEL;
2) Explosimeter-catharometer - 2 measurement scales : 0-100% LEL - 0-100% Vol. Gas;
3) Explosimeter - 3 measurement scales: 0-10.000 ppm - 0-100% LEL - 0-100% Vol. Gas;
4) Methanometer - 1 measurement scale: 0-4.4% CH4.
Easy-to-use:
• Single control key;
• Simple user inter face;
• Gas library.
Maintainable equipment:
Quick and easy sensor replacement.
Powerful alarms:
• Visual fl ashing red LED alarms;
• 95 dB Audible alarm;
• Vibration alarm.
High levels of perfomance and reliability:
• High sensor stability on extended exposure to gas;
• Self-test at start-up;
• Regulated charger/test station, compatible with Gazomat calibration unit;
• 15 hr operating time between recharges;
• 2 audible, visual and vibration alarm thresholds and a continuous default alarm.
Wide range of applications:
• Gas transmission;
• Refineries;
• Gas distribution;
• LPG storage;
• Coal mines;
• Fire and rescue brigades, etc.
µ G A Z T O X ™
Oxygen and Toxic Gas Detector
Personal protection for hazardous environments
The µGaztoxTM detector is a personal protection device designed for use by operators who may be exposed to hazardous gas concentrations in their workplace.
Depending on the type of sensor fi tted this single gas detector measures hazardous concentrations of oxygen (O2) or toxic gases such as hydrogen sulphide (H2S), carbon monoxide (CO), sulphur dioxide (SO2) or other gases.
The µGaztoxTM is an essential tool for on-site safety of professionals.
Easy-to-use:
• Single control key;
• Self-test at start-up;
• Displays gas concentrations and status indicators.
Robust and compact design:
• Elastomer housing which is resistant to extreme conditions;
• High protection index - IP 67;
• Fastening clips for hands-free utilisation - can be clipped onto pockets, belts, straps or safety helmets.
STOPAQ AQUASTOP 2100 - Blīvmaisījums
• Sienas ieejas zem ūdens līmeņa
• Tekošas ūdens sūces blīvēšana
• Sienu izvadkanāli ēkās
• Vairākas caurules un kabeļievadi
Pazīmes:
• Adhēzija uz mitrām un sausām virsmām;
• Ātra un viegla lietošana;
• Ūdens un gāzes necaurlaidīgs;
• Ilglaicīga aizsardzība uz aukstiem apakšzemes ievadiem, nenoveco.
Savienojumi piemēroti sienu, cauruļu, kabeļievadu un dobju laukumu blīvēšanai pret gāzēm, mitrumu, stāvošu ūdeni un tekošām gruntsūdens sūcēm.
Pazīmes:
• Nepieciešama minimāla virsmas sagatavošana;
• Adhēzija uz mitrām un sausām virsmām;
• Ātra un viegla lietošana;
• Var izturēt līdz pat 0,3 bāriem no gruntsūdens spiediena;
• Ūdens un gāzes necaurlaidīgs;
• 2100 Aquastop Non Toxic aparāts un videi draudzīgs;
• Neierobežots glabāšanas laiks.
PRIEKŠROCĪBAS
• Blīvējums paliek elastīgs;
• Nav nepieciešami īpaši lietošanas rīki;
• Nav materiālu zudums - pastu var atkārtoti izmantot;
• Tūlītējs blīvējums, nav nepieciešams saistīšanās laiks;
• Nodrošina pastāvīgu un optimālu drošību;
• Tiek piemērots cauruļu un kabeļu kustībām, videi draudzīgs;
• Ļauj papildināt un izņemt kabeļu izvadkanālus, izmantojot modifikācijas.
• Caurules diametrs: < 6”
Tinuma lentes izmērs: 50mm x 5m (2” x 164’) • Caurules diametrs: ≥ 6”
Tinuma lentes izmērs: 100mm x 10m (4” x 328’)
• Caurules diametrs: < 4”
Ārējā tinuma izmērs: 50mm x 10m (2” x 33’) • Caurules diametrs: “4”–10”
Ārējā tinuma izmērs: 75mm x 30m (3” x 98,5’) • Caurules diametrs: 10”–16”
Ārējā tinuma izmērs: 100mm x 30m (4” x 98,5’) • Caurules diametrs: ≥ 16”
Ārējā tinuma izmērs: 150mm x 30m (6” x 98,5’)
• Caurules diametrs: < 4”
Ārējā tinuma izmērs: 50mm x 10m (2” x 33’) • Caurules diametrs: “4”–10”
Ārējā tinuma izmērs: 75mm x 30m (3” x 98,5’) • Caurules diametrs: 10”–16”
Ārējā tinuma izmērs: 100mm x 30m (4” x 98,5’) • Caurules diametrs: ≥ 16”
Ārējā tinuma izmērs: 150mm x 30m (6” x 98,5’)
Tank bottoms (chime area)
• STOPAQ 4200 Filler + EZ
STOPAQ Paste CZ (depending on chime width)
• STOPAQ Wrappingband CZ at horizontal + STOPAQ Wrappingband EZ for the vertical part overlapping Wrappingband CZ
Tank roofs
• STOPAQ Wrappingband EZR (1.4 mm) + suitable finishing coating, like STOPAQ Topcoat
Under Insulation & Fireproofing
• STOPAQ Wrappingband, productline depending on temperature and insulation material
Innovative Infrared Technology
For Non-Contact Temperature Measurement
High quality for contemporary prices:
Through the establishment of Optris GmbH, the founder aim to add innovative measuring and application principles to the wide range of non-contact temperature sensors. Doing this, Optris combines high quality infrared thermometers and thermal imagers with contemporary prices, in order to provide the best and modern infrared technology to as many customers as possible.
How does Optris achieve this goal?
The main parts of our basic technology are based on the semiconductor industry. In order to provide progressive technology, Optris cooperates with semiconductor suppliers assuming the sale of high quantities. This leads to the manufacturing of high volumes of infrared sensors and to cost benefi ts, which we directly forward to our customers.
Measurement technology made in Germany
Optris GmbH is one of the leading innovative companies in the wide range of non-contact temperature measurement through infrared radiation since its establishment in 2003.
The extensive knowledge and innovative thinking of our well-experienced engineers and physicists allow us to constantly offer optimized solutions for our customers‘ applications.
The product development, 90 percent of the production and the sales of the products take place at our headquarters in Berlin to ensure a high quality of all products. Due to the close working relationship of each department, we are able to continuously adjust our product range and react fast towards market needs.
Our direct sales network consists of well-experienced engineers, who ensure that all of our customers receive competent guidance, solutions for measurement tasks as well as an excellent service.
We have a large network of distributors all over the world to ensure worldwide sales of our products as well as fast and qualifi ed regional customer services. It is of great importance for us that all of our distributors have very good knowledge regarding our products and therefore they receive regular product training.
Overview of our 4 Product Series
Next to time, temperature is the most frequently measured physical property. Non-contact temperature measurement through infrared radiation is therefore a favoured and established method for many of our customers.
If you have decided to use non-contact temperature sensors for your applications, the question is what would be the ideal device for you. The following three pages will offer you a good overview of the most important decision criterias of all our products for an easy device choice.
The following pages covering the 4 product series will present the uniqueness of each series according to the decision criterias. The indexes on the right site of each page give you an orientation within which product group you are.
1. Compact Series
Small, compact infrared thermometers ideal for use in cramped and hot surroundings. 2. High Performance Series
Infrared thermometers with highest optical performance and double laser. 3. Infrared Cameras
Compact thermal imagers for fast stationary applications, including linescanner functionality. 4. Portable Thermometers
High quality infrared thermometers with integrated USB interface.
Float Level Switches for Liquids
• For level control of multiple pumps
• For level control of individual pumps
• For narrow access tanks / For drinking water
• For high level control
• For level control of multiple pumps
• For level control of individual pumps
• For narrow access tanks / For drinking water
• For high level control
For LIIQUIIDS and BULK SOLIIDS…
Why has ATMI developped such a wide range of Float & Tilt switches: 20 models in 50 versions…
• Lower cost to solve a great deal of LEVEL MEASUREMENT problems.
• Higher reliability and durability thanks to the mechanical «float switch» level system, which is by far the simplest, the most reliable, the most resistant in time, and the easiest to install.
Special characteristics of ATMI level switches
• High quality manufacturing: Made in exclusively in France, benefiting from 35 years of experience. All ATMI level switches are individually tested.
• Biconical shape: which avoids any risk of clogging, assuring maximum and long lasting effectiveness. No maintenance needed.
• Omnidirectionnal operation: All ATMI float level switches can work in any position, contrary to flat-shaped level switches that can only work in one position.
• Unbreakable and stainless steel ballasts: which can be adjusted or attached on the cables. They can be fixed at the desired height in order to assure an accurate operation in still or agitated liquids in very diverse liquids’ densities. This is a major advantage compared to “internal ballast” float switches, which are appreciated for specific applications.
• Variety of switching angles (from +/-20º to +/-165º): Essential for different applications. The big switching angles allow a level measurement with just one float level switch and prevent excessive jerking of the pump.
• All ATMI level switches are ecological: They do not contain any lead or mercury and are manufactured with the world’s best components.
• Neoprene or HR HY (ex hypalon) cables are used for most of ATMI’s float and tilt level switches. This ensures long lasting water immersion without any problem, even if dealing with most aggressive liquid mixtures.
• Dust-proof, energy-saving tilt switches for bulk solids: Their operation is not affected even when the device is completely covered with dust, unlike other types of level measurement devices. They only operate when the high level is reached. This represents considerable energy and costs savings.
• Certifications: Quality ISO 9001-2008, ATEX (Ex) for explosive zones, ACS for drinking water meant for human consumption, CE (European Conformity), RoHS (Reduction of Hazardous Substances).
Pneumatic gas stoppers (gas bags)
Pneumatic Stopper Type G/L
SO.CA.P. reserves the right of making changes to the products and their technical characteristics without notice.
The pneumatic stopper type G/L is used to plug temporarily circular pipes like pipelines and gas lines at relatively low pressures.
This pneumatic stopper is made with synthetic fabric coated on both faces with oil resistant plastomers and PU; the elasticity of its diameter is such to allow a perfect sealing in the pipe.
After its correct positioning into the pipeline, the stopper can be inflated with air or nitrogen
through the flexible hose fitted with an inflating valve.
Technical Schedule
Description
The pneumatic stopper type G/L, can be inflated with air or nitrogen and is made with synthetic fabric coated on both faces with oil resistant plastomers and PU. Its diameter increase is sufficient to guarantee the perfect sealing into the pipeline.
Usage
The pneumatic stopper type G/L is suitable to plug
temporarily circular section pipes like pipelines, gas lines
at relatively low pressures.
GAZOSCAN ™
Gas Leak Detection and Natural Gas Network Survey.
Handheld Remote Methane Leak detector with Laser Spectroscopy Technology
• Methane selective – no false alarm;
• Instant response time (0.1s);
• Lightweight and easy to use;
• Can detect through glass;
• 330ft (~100m) distance detection.
Using the powerful Laser Spectroscopy technology, the GAZOSCAN™ from GAZOMAT™ is a handheld remote methane detector (RMD) offering methane selectivity. Ultra-portable and very easy to use, this device detects leaks at 100m (~330ft) distance on outside gas pipelines along buildings, bridges or within gas and industrial sites. Its capacity to detect gas through glass also makes it an essential tool for conducting inspections within cities, safely and efficiently.
How it works
The laser beam of the GAZOSCAN™ detector is transmitted towards the target. Once reached, the beam is then reflected back to the detector for analysis. The results will show on the display screen immediately.
Easy to use, quick to respond
• Instant resonse time (0.1s);
• Large LCD screen (2.8 inches);
• Configurable alarm threshold;
• Visual and audio alarms;
• Maximum reading on display until resetting;
• Three scanning speeds (fast, medium, slow) for easy leak spotting (Fast) and measurement accuracy (Slow);
• Red dot sight for precise targeting in daylight
Extended applications
Suited to any situations where field technicians cannot operate close to the inspection zone:
• Transmission & distribution network survey;
• Industrial and commercial property survey;
• Gas processing and gas storage plants;
• Industrial sites monitoring;
• Emergency response, etc.
“Connected” functionality
• Bluetooth communication for data transfer;
• Designed to work with GAZOSURVEY app (optional) on Android/IOS mobile phones/devices;
• GPS leak localisation and survey traceability;
• Capacity to enter notes, capture and store pictures.
GAZOSCAN™ kit includes
1 - Handheld remote methane leak detector
2 - Power adapter
3 - Charging base
4 - Screen cover
5 - Carrying case
6 - Battery
